GE Zenith’s ZTX Series Automatic Transfer Switches are
designed for residential and light commercial critical/
non-life safety applications requiring the dependability
and ease of operation found in a power contactor switch.
• Ratings
40 to 400 amps (2, 3 and 4 pole)
•
UL 1008, CSA and IEC listed to 480 VAC 50/60Hz
• Seismic Compliance to
IEEE-693-2005 and IBC-2003
• Double throw, mechanically interlocked
contactor mechanism
• Electrically operated, mechanically held
• Designed for standby applications
GE Zenith’s ZTX switches are equipped with the MX60
control panel. This microprocessor control includes:
• Undervoltage sensing (
90% pickup/80% dropout)
of Source
1 (normal)
• Voltage and frequency sensing of Source
2 (emergency)
(
90% voltage/95% frequency pickup)
• Time Delay Engine Start (
P) - 5 seconds
• Time Delay Engine Warmup (
W) - Transfer to
Emergency (Source
2) - 20 seconds
• Time Delay Utility Stabilization/Retransfer to
Utility (Source
1) (T) - 5 minutes
• Time Delay Engine Cool Down (
U) - 5 minutes
All time delays are fixed (non-adjustable).
The unit is available in open type, NEMA 1 or NEMA 3R
enclosures. The MX60 control adds a user interface
and functionality, including:
• Indicating
LEDs for source availability and switch position
• Pushbuttons for test, exerciser set, timer bypass
and program cancel
• Special status annunciation of in-phase transfer
and timer operation
• Selectable
7, 14, 21 or 28 day (factory set 28 days)
generator (Source 2) with or without load exerciser timer
• Diagnostic
LED indications in logical one-line configuration
Additional options include:
A3/A4 Auxiliary contacts (1 each) closed in Source 1
(normal) and Source 2 (emergency) positions
B9X
1.5 Amp/12 or 24 VDC Battery Charger
GE Digital Energy
Power Quality
ZTX
Automatic Transfer Switch
ZTX Series Residential & Light Commercial Switch
with
LED Control Panel (cover removed)
MX60 Microprocessor Control Panel
Comments to this Manuals