Winco HPS9000VE/C Specifications download pdf (Page 45)

BRUSHLESS

TWO BEARING

GENERATORS

WINCO’s TB Series Two Bearing Generators incorporate a rugged yet lightweight, brushless design.

Epoxy baked rotors, oversized diode, cast iron drive-side end brackets and double sealed permanent

bearings all combine to insure maximum performance and life. Units are designed to rotate either

direction without changing the wiring, and are rated at unity power factor, requiring approximately 2

HP input for each 1000 watts output from the generator. Each unit is factory tested to insure its

performance and reliability.

TB6000C TB72000GFI

225 South Cordova Ave

Le Center MN 56057

East Coast: (800) 733-2112

West Coast & Canada: (800) 324-8174

Web Site: www.wincogen.com

MODEL NUMBER TB2400C TB4000C* TB6000C* TB7200GFI*

WATTS 2400 4000 6000 7200

RATED AC AMPS 20 33.3/16.7 50/25 60/30

VOLTS @ 60 HZ 120 120/240 120/240 120/240

OPERATING SPEED 3600 rpm 3600 rpm 3600 rpm 3600 rpm

MOTOR STARTING CAPABILITY 3/4 hp 1-1/2 hp 3 hp 5 hp

RECEPTACLES:

120V NEMA 5-20R 2-20 amp 4-20 amp 4-20 amp N/A

120V NEMA L5-15R N/A N/A N/A 4-15 amp

120/240V NEMA L14-30R N/A 1-30 amp 1-30 amp 1-30 amp

CIRCUIT BREAKERS 1-20 amp 2-20 amp 2-25 amp 1-30 amp GFI, 4-15 amp

LENGTH 14.25 in. 15.13 in. 17.75 in. 20.13 in.

WIDTH 8.5 in. 8.5 in. 8.5 in. 8.5. in.

HEIGHT 8.94 in. 8.94 in. 8.94 in. 11.75 in.

SHAFT DIAMETER 1.125 in. 1.125 in. 1.125 in. 1.125 in.

WEIGHT 61 lbs. 67 lbs. 86 lbs. 118 lbs.

WARRANTY 1 year 1 year 1 year 1 year

* These units can be reconnected for 120V full power. Consult factory for details.

A Tradition Since 1927

TB 10/08

1 2 ... 40 41 42 43 44 45 46

No comments

Winco HPS9000VE/C Specifications Page 45